Broadcom Brocade G720 - Nonport-Side View of the Device; Device Management Options

G720-Install-IG101 Installation Guide Brocade
®
G720 Switch Hardware Installation Guide
Nonport-Side View of the Device
The following illustration shows the nonport-side view of the Brocade G720 FC switch.
Figure 2: Nonport-Side View with AC Power Supply and Fan Assembly Units
1. #6-32 for Screw Mounting of the Ground Cable
2. Ground Marking
3. Power Supply and Fan Assembly 2
4. Power Supply and Fan Assembly 1
5. Captive Screw
6. Handle
7. Power Supply and Fan Assembly Status LED
8. Power-On Switch
9. Power Supply Receptacle
Device Management Options
You can use the management functions built into the device to monitor the fabric topology, port status, physical status, and
other information to help you analyze switch performance and to accelerate system debugging. The device automatically
performs a power-on self-test (POST) each time it is turned on. A RASlog message is generated for any detected startup
errors.
You can manage the device using any of the management options that are listed in the following table.
Table 3: Management Options for the Device
Management Tool Out-of-Band Support Reference Documents
Command line interface (CLI)
Up to two admin sessions and four user
sessions simultaneously.
Ethernet or serial connection Brocade Fabric OS Administration Guide
Brocade Fabric OS Command Reference Manual
Brocade EZSwitchSetup
EZSwitchSetup helps to complete the
basic configuration for single-switch setup.
Ethernet or serial connection EZSwitchSetup Software Installation Guide
EZSwitchSetup Administrator's Guide
Brocade Web Tools Ethernet or serial connection Brocade Fabric OS Web Tools Administration Guide
Standard SNMP applications Ethernet or serial connection Brocade Fabric OS MIB Reference Manual
Management Server Ethernet or serial connection Brocade Fabric OS Administration Guide
Brocade Fabric OS Command Reference Manual
Brocade SANnav Management Portal
Brocade SANnav Management Portal
must be purchased separately.
Ethernet or serial connection Brocade SANnav documentation set
G720-Install-IG101
12
Broadcom