Broadcom Brocade G720 - Brocade G720 Switch Technical Specifications; System Specifications; Fibre Channel Ports

G720-Install-IG101 Installation Guide Brocade
®
G720 Switch Hardware Installation Guide
Brocade G720 Switch Technical Specifications
The following tables highlight the features and specifications for the Brocade G720 Switch.
System Specifications
System Component Description
Enclosure 1U, port-side back-to-front exhaust airflow, power from the back.
Power inlet C14.
Power supplies Dual, hot-swappable, redundant, AC input power supplies with integrated system cooling fans. DC
power supplies are not supported on the Brocade G720 Switch.
Fans Fans are integrated into each power supply and fan assembly.
Cooling Port side to the nonport side of the switch (nonport-side exhaust) and nonport side to the port side
(port-side exhaust).
System architecture Nonblocking shared memory switch.
Fibre Channel Ports
System Component Description
Fibre Channel ports 56 SFP+ ports that support any combination of short wavelength (SWL) and long wavelength (LWL)
optical media.
Each of the 56 SFP+ ports supports 8, 10, 16, 32, and 64Gb/s Fibre Channel speeds.
The SFP+ ports are capable of autonegotiating to 8, 16, 32, or 64Gb/s speeds depending on the
SFP+ model and the minimum supported speed of the optical transceiver at the other end of the link.
•
A 64Gb/s optical transceiver can autonegotiate to 64Gb/s, 32Gb/s, or 16Gb/s.
•
A 32Gb/s optical transceiver can autonegotiate to 32Gb/s, 16Gb/s, or 8Gb/s.
•
A 10Gb/s optical transceiver can autonegotiate to 10Gb/s.
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signaling Interface standard).
Modes of operation Fibre Channel Class 2 and Class 3.
Fabric initialization Complies with FC-SW-3 Rev. 6.6.
Fibre Channel over IP (FCIP) Complies with FC-IP 2.3 of the FCA profile.
Port status
48 LEDs (green/amber) for the first 48 SFP+ ports and 8 tri-color LEDs (green/amber/white) for the
last 8 SFP+ ports: 48, 50, 52, 54, 56, 58, 60, and 62. The last set of LEDs pulse once in white before
indicating the FC port status in green or amber. All functionalities pertaining to the green/amber
colors for the last 8 LEDs remain the same as the first 48 LEDs.
Other Ports
System Component Description
Serial console port UART mini-USB.
Ethernet management port One 100/1000Mb/s Ethernet port.
USB port One external USB port.
G720-Install-IG101
70
Broadcom