Broadcom Brocade G720 - Mid-Mounting; Attaching the Front Brackets to the Rack

G720-Install-IG101 Installation Guide Brocade
®
G720 Switch Hardware Installation Guide
•
The device must be turned off and disconnected from the fabric during this procedure.
•
The illustrations in this document show a 1U device, but the instructions are the same for a 2U device.
•
The illustrations in the rack installation procedures are for reference only and may not show the actual device.
Complete the following tasks to install the device in the rack:
1. Attaching the Front Brackets to the Device
2. Attaching the Front Brackets to the Rack
3. Attaching the Rear Brackets to the Rack
4. Attaching the Rear Brackets to the Device
G720-Install-IG101
41
Broadcom