EasyManuals Logo

Brother 1034D Handbook

Brother 1034D
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
"IMPORTANT SAFETY INSTRUCTIONS"
When using the sewing machine, basic safety precautions should always be followed,
including the following.
"Read all instructions before using."
DANGER – To reduce the risk of electric shock.
1. The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine
from the electrical outlet immediately after using and before cleaning.
2. Always unplug before relamping. Replace bulb with same type rated 15 watts.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by or near
children.
2. Use this sewing machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer
or service center for examination, repair, electrical or mechanical adjustment.
4. Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot controller free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any openings.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol “O” position which represents off, then remove plug from
outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sewing machine to the symbol “O” position when making any adjustments in the needle area, such
as threading needle, changing needle, or changing presser foot, and the like.
15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when
making any other user servicing adjustments mentioned in the instruction manual.
16. This sewing machine is not intended for use by young children or infirm persons without supervision.
17. Young children should be supervised to ensure that they do not play with this sewing machine.
CAUTION – This appliance has a polarized plug (one blade wider than the other) to reduce the
risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit. Contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
"SAVE THESE INSTRUCTIONS"
"This sewing machine is intended for household."

Table of Contents

Other manuals for Brother 1034D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother 1034D and is the answer not in the manual?

Brother 1034D Specifications

General IconGeneral
TypeSerger
Number of Threads3 or 4
Stitch Length1.0mm to 4.0mm
Differential FeedYes
Differential Feed Ratio0.7 to 2.0
Maximum Sewing Speed1, 300 stitches per minute
Color-Coded ThreadingYes
Adjustable Stitch WidthYes
Free ArmYes
Thread TensionAdjustable
Presser Foot LifterYes
Built-in Thread CutterYes
Free Arm CapabilityYes
Power Requirements120V, 60Hz
Stitch Typesrolled hem
Stitch Width5.0mm - 7.0mm (overlock), 2.0mm (rolled hem)
NeedleStandard sewing machine needles (size 11 or 14)
Included Accessoriesgathering foot

Related product manuals