SETUP SEND 6 - 21
Using Memory Security
You must use a password to switch Memory Security ON and OFF.
Setting Up Memory Security for the First Time
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Enter a 4-digit number as a new
password.
3
Press
Menu/Set
.
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
Menu/Set
.
5
Press to choose SET SECURITY.
6
Press
Menu/Set
.
The screen prompts you to enter the
password.
7
Enter a 4-digit password, followed by
Menu/Set
.
This is the same as the security password of the machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
SECURE MODE - Memory Security is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then start from Step 5 to set Memory Security.
MISCELLANEOUS
1.MEM SECURITY
MEM SECURITY
NEW PASSWD:XXXX
MEM SECURITY
VERIFY:XXXX
MEM SECURITY
PASSWORD:XXXX
To Next Page
Loading...
Need help?
General
