5 - 8 SETUP RECEIVE
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external
telephone, you can make your MFC take the call by using the
Remote Activation Code. When you press the Remote Activation
Code
5 1
, the MFC starts to receive a fax.
(See Fax Detect on page 5-6.)
If the MFC answers a voice call and pseudo/double-rings for you to
take over, use the Remote Deactivation Code
# 5 1
to take the call
at an extension phone. (See Setting the F/T Ring Time (FAX/TEL
mode only) on page 5-5.)
If you answer a call and no one is on the line, you should assume that
you’re receiving a manual fax.
■ Press
5 1
wait for the chirps then hang up, if you are near to
the machine the LCD will display RECEIVING.
Your caller will have to press Start to send the fax.
For FAX/TEL mode only
When the machine is in F/T mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call. Lift the
external telephone's handset, and then press
Speaker Phone
twice to answer.
If you’re at an extension or external phone, you’ll need to lift the
handset during the F/T Ring Time and then press
# 5 1
between the
double rings. If no one is on the line, or if someone wants to send you
a fax, send the call back to the machine by pressing
5 1
.
To Next Page
Loading...
Need help?
General
