SETUP RECEIVE 5 - 9
Using a cordless external handset
If your cordless telephone is connected and you typically carry the
cordless handset elsewhere, it is easier to answer calls during the
Ring Delay. If you let the MFC answer first, you will have to answer
using the cordless and then go to the MFC so you can press
Speaker Phone
to transfer the call to the cordless handset.
Changing the remote codes
Remote Codes might not work with some telephone systems. The
preset Remote Activation Code is
5 1
. The preset Remote
Deactivation Code is
# 5 1
.
1
Press
Menu/Set
,
2
,
1
,
5
.
2
Press to select ON (or OFF).
Press
Menu/Set
.
3
If you want to, enter a new Remote Activation Code.
Press
Menu/Set
.
4
If you want to, enter a new Remote Deactivation Code.
Press
Menu/Set
.
5
Press
Stop/Exit
.
If you are always disconnected when accessing your external
TAD remotely, try changing the Remote Activation Code and
Remote Deactivation Code to other three-digit codes (such as
# # #
and
9 9 8
).
SETUP RECEIVE
5.REMOTE CODE
To Next Page
Loading...
Need help?
General
