G - 1 GLOSSARY
G
Auto Dial List A listing of names and numbers stored in Speed Dial
memory, in numerical order.
Automatic fax transmission Sending a fax without picking up the
external telephone’s handset or pressing
Speaker Phone
.
Automatic Redial A feature that enables your MFC to redial the last
fax number if the original fax did not go through because the line
was busy.
Auto Reduction Reduces size of incoming faxes.
Batch Transmission As a cost savings feature, all delayed faxes to
the same fax number will be sent as one transmission.
Backup Print Sets your MFC to print a copy of every fax that is
received and stored in memory.
This is a safety feature so you will not lose message during a
power failure.
Beeper The sound the keys make when they are pressed, an error
occurs or a document has been received or transmitted.
Beeper volume Volume setting for the beep when you press a key
or make an error.
Brightness Changing the Brightness makes the whole image
lighter or darker.
Broadcasting The ability to send the same fax message to more
than one location.
Cancel Job Cancels a programmed job, like Delayed Fax or
Polling.
CNG tones The special tones (beeps) sent by fax machines during
automatic transmission to tell the receiving machine that they are
a from fax machine.
Communication error (or Comm. Error) An error during fax
sending or receiving, usually caused by line noise or static.
Glossary
To Next Page
Loading...
Need help?
General
