15 - 4 HOW TO SCAN USING WINDOWS
®
Scanning a document into the PC
You can scan a whole page
—OR—
scan a portion of the page after pre-scanning the document.
Scanning a whole page
1
Place the original face down on the scanner glass.
2
Adjust the following settings, if required, in the Scanner window:
■ Scan (Image Type)
■ Resolution
■ Scan Type
■ Brightness
■ Contrast
■ Document Size
(See Settings in the Scanner window on page 15-7.)
3
Click the Start button in the scanner window.
When scanning is completed, click Cancel to return to the
PaperPort
®
window.
After you select a document size, you can adjust the scanning
area further by clicking the left mouse button and dragging it.
This is required when you want to crop an image when
scanning.
To Next Page
Loading...
Need help?
General
