Brother BAS-326 - 4. Flap Seaming; Flap Seaming Clamp Preparation

4. Flap Seaming
Making the Clamp
Presser foot A
152283- 101
BAS-326· 340
1) When making the clamp, use the parts provided as
cassette-type optional parts.
Cassette plate U-A (t = 1)
502968-001
Cassette plate U-B (t = 2)
502971-001
Cassette plate 0-A
502966-001
2 Butterfly program (right)
152632-001
3 Butterfly program (left)
152633-001
2) When using presser foot A for sewing, because the
outside diameter of presser foot A is 4mm, process
the width ofthe cassette plate groove to be 5mm.
NOTE: Use a punch cutter or a thread saw for
processing.
3) If the material being sewn slips during sewing,
sewing
can be carried out more easily if sandpaper
or
thin rubber is stuck to the lower surface of the
cassette plate U and the upper surface of the
cassette plate D.
-12-
From the library of: Superior Sewing Machine & Supply LLC