Brother BAS-326 - 6. Bar Tacking; Bar Tacking Programming Procedure

6. Bar Tacking BAS-311· 326
~
W~'·aWlvV/1
~
W¥14
Number of stitches: 42
Number
of stitches: 35 Number of stitches: 28
Number ofstitches: 21
Stitch size: 7- 16 x 1 - 2
St itch size: 7- 20 x 1.5-3 Stitch size: 6.5- 16 x 1 - 2
Stitch size: 3 - 7 x 1 - 2
·The bar tacking as shown above can be programmed and sewn freely.
Programming Procedure
Because the number of cross stitches is small, it is advisable to use the enlargement function to make
programming easier.
1. Enlarge the stitching pattern by five or ten times the original size.
2. After the [f) key is pressed, "905" will be displayed in the STEP space for 5 times enlargement, and "91 0"
will be displayed for 10 times enlargement.
3. Press the 1M1 key.
4. Use the jog key to set the program for each stitch.
5. After programming the final stitch, key in" 111 [§".
6. Save the program on the floppy disk.
7. Although the stitch pattern was enlarged, the program will be written in the original size on the floppy
disk.
Work clamp (Option)
-16-
· OT presser foot D assembly
· Presser foot SL
· Presser foot SR
· OT feed plate bracket assembly
• OTfeed plate
·Screw
S14846-001
S14255-001
S14254-001
S14841-001
S14252-001
149168-001
2
2
From the library of: Superior Sewing Machine & Supply LLC