Brother DCP-110C - Running PC-FAX Receiving; Setting up Your PC

USING BROTHER PC-FAX SOFTWARE 5 - 19
Setting up PC-FAX receiving
(MFC-410CN, MFC-620CN, MFC-5440CN,
MFC-5840CN and MFC-3340CN only)
The PC-FAX Receive function will automatically upload incoming
faxes received by your machine to your PC for viewing, printing or
deleting.
Running PC-FAX Receiving
From the Start menu, select Programs, Brother, MFL-Pro Suite
MFC-XXXX (Where XXXX is your model name), and then select
‘PC-FAX Receiving’.
The PC-FAX icon will appear on your PC Task
bar for this Windows
®
session.
Setting up your PC
1
Right-click the PC-FAX icon on your PC
Task Bar, and then click PC-Fax RX Setup.
2
The PC-Fax RX Setup dialog box will appear:
Before you use the PC-FAX Receive function, you must select
the option of PC-FAX Receive from the menu on the machine.
(See Setting PC Fax Rx in the User’s Guide.)
PC-FAX receiving is only available when using the USB
connection, not the LAN connection.