Brother DCP-110C - Setting up Your USB-Equipped Apple Macintosh; Using Your Machine with a Macintosh

USING YOUR MACHINE WITH A MACINTOSH
®
8 - 1
8
Setting up your USB-equipped
Apple
®
Macintosh
®
The features supported by the machine will depend on the operating
system you are using. The chart below shows which features are
supported.
*1 For the details of ControlCenter2.0, see Using the
ControlCenter2.0 (For Mac OS
®
X 10.2.4 or greater) on page
8-26.
*2 For Mac OS
®
X 10.2.0 to 10.2.3 user, please upgrade to Mac OS
®
X 10.2.4 or greater. (The latest information for Mac OS
®
X, please
visit at: http://solutions.brother.com)
Using your machine with a
Macintosh
®
Before you can connect the machine to your Macintosh
®
, you
must buy a USB cable that is not longer than 2 metres.
Do not connect the machine to a USB port on a keyboard or
a non-powered USB hub.
Feature Mac OS
®
Mac OS
®
X
8.6 9.X 10.2.4 or
greater
*
2
Printing Yes Yes Yes
Scanning (TWAIN) No Yes Yes
ControlCenter2.0
*
1
No No Yes
PC-FAX sending Yes Yes Yes
Remote Setup No No Yes
PhotoCapture Center No Yes Yes