Brother DCP-110C - Registering Your PC with the Machine

7 - 2 NETWORK SCANNING
Registering your PC with the machine
If you need to change the machine that was registered to your PC
during the installation of MFL-Pro Suite (see Quick Setup Guide),
follow the steps below.
1
For Windows
®
XP
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanners and Cameras (or Control Panel,
Scanners and Cameras).
For Windows
®
98/Me/2000
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
Right-click the Scanner Device icon and select properties to
view the Network Scanner Properties dialog box.