8 - 22 USING YOUR MACHINE WITH A MACINTOSH
®
3
Specify your machine by IP Address or Node Name.
To change the IP address, enter the new IP address.
To change the Node Name of your machine, enter the new node
name. Each node (machine) has its own node name. You can
find the node name by printing out the machine configuration
page. (Please see the Network User’s Guide on the CD-ROM.)
The default Node Name is “BRN_xxxxxx” (“xxxxxx” is the last six
digits of Ethernet address.)
You can also select a machine from the list of the machines
available. Click Browse to show the list.
4
Click the OK button.
Using the Scan Key
For Network users, see Using the Scan key on page 7-5.
For USB users, see Using the Scan key (For USB cable users) on
page 2-20.
You can avoid receiving unwanted documents by setting a
4-digit Pin number. Enter your Pin number in the Pin number
and Retype Pin number field. To send data to a computer
protected by a Pin number, the LCD prompts to enter the Pin
number before the document can be scanned and sent to the
machine. (See Using the Scan key on page 7-5 to 7-8.)
Turn on Register your computer with the “Scan To”
functions at the machine and enter a 4 digit PIN number.
To Next Page
Loading...
Need help?
General
