Brother DCP-110C - Page 56

2 - 24 HOW TO SCAN USING WINDOWS
®
5 Press
▲
or
▼
to select the quality you want.
To change the file type, press
Menu/Set
and go to Step 6.
—OR—
To start scanning, press
Mono Start
or
Colour Start
.
6
Press
▲
or
▼
to select the file type you want.
To change the file name, press
Menu/Set
and go to Step 7.
—OR—
To start scanning, press
Mono Start
or
Colour Start
.
7
The file name is set automatically however, you can set a name
of your choice using the dial pad. You can only change the first
6 digits. (Not available for DCP-110C and DCP-310CN)
Press
Mono Start
or
Colour Start
to start scanning.