Brother DCP-750CW - Function Table and Default Factory Settings

Appendix B
109
B
Function table and default factory settings B
Level1 Level2 Level3 Options Options
LAN TCP/IP
(Wired)
BOOT Method Auto/Static/RARP/BOOTP/
DHCP
IP Address Change [000-255].[000-255].[000-
255].[000-255].
[000].[000].[000].[000]
1
Exit
Subnet Mask Change [000-255].[000-255].[000-
255].[000-255].
[000].[000].[000].[000]
1
Exit
Gateway Change [000-255].[000-255].[000-
255].[000-255].
[000].[000].[000].[000]
Exit
Node Name Change BRN_XXXXXX= (last 6 figures of
Ethernet address)
(up to 15 characters)
BRN_XXXXXX*
Exit
WINS Config Auto/Static
WINS Server Primary/Secondary [000-255].[000-255].[000-
255].[000-255].
[000].[000].[000].[000]
DNS Server Primary/Secondary [000-255].[000-255].[000-
255].[000-255].
[000].[000].[000].[000]
APIPA On/Off