Wireless Configuration for Macintosh
®
59
5
Configuration with an access point that supports
SecureEasySetup™ 5
For Mac OS
®
X 10.2.4 or greater 5
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, a or b for Factory Reset
and select Yes to accept the change. The machine will restart automatically.
a Turn on the machine by plugging in the power cord.
b Turn on your Macintosh
®
.
c Put the supplied CD-ROM into your CD-ROM drive.
d Double-click the Utilities icon and then Wireless LAN Setup Wizard.
To Next Page
Loading...
