Brother DCP-750CW - 4 Wireless Configuration for Windows; Configuration in Infrastructure Mode; For Windows 98;98 Se;Me;2000 Professional;Xp;Xp Professional X64 Edition

26
4
4
Configuration in Infrastructure mode 4
For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition 4
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, a or b for Factory Reset
and select Yes to accept the change. The machine will restart automatically.
a Turn on the machine by plugging in the power cord.
b Turn on your computer.
(For Windows
®
2000, XP and XP Professional x64 Edition, you must be logged on with Administrator
rights.)
Note
• Before configuration, if you are using personal firewall software, disable it. Once you are sure that you can
print after the installation, restart your personal firewall software.
• A wireless network connection is supported only between the Brother machine and an access point for
PC’s running Windows
®
XP Professional x64 Edition.
c Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
Wireless Configuration for Windows
®
4