Brother DCP-750CW - Page 86

Control panel setup
79
6
Signal 6
This field displays the current wireless network signal strength; Strong, Medium, Weak or None.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select WLAN Status.
Press OK.
d Press a or b to select Signal.
Press OK.
e The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
f Press Stop/Exit.
SSID 6
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select WLAN Status.
Press OK.
d Press a or b to select SSID.
Press OK.
e The current wireless network SSID will be displayed.
f Press Stop/Exit.