Network Scanning (For models with built-in network)
99
4
h Choose the authentication method. You can choose Auto, Kerberos or NTLMv2.
If you choose Auto the authentication method will be detected automatically.
i Enter the Username that has been registered with the CIFS server for the machine (up to 32 characters).
j Enter the Password for access to the CIFS server (up to 32 characters).
k If you want to set Kerberos Server Address manually, enter the Kerberos Server Address (for example
/brother/abc/) (up to 60 characters).
Scan to Network using Scan to Network Profiles 4
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to Network. Press OK.
d Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
e Press a or b to choose one of the profiles listed. Press OK.
f If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management,
the LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
If the profile is complete, you will automatically go to step j.
If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
g Choose one of the options below:
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi. Press OK and go to step h.
Press a or b to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to step i.
h Press a or b to choose PDF, Secure PDF, JPEG or XPS.
Press OK, and go to step j.
i Press a or b to choose PDF, Secure PDF or TIFF. Press OK.
Note
If you chose Secure PDF, the machine will ask you to enter the password before it starts scanning.
j Do one of the following:
If you want to start scanning, press Start.
If you want to change the file name, go to step k.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
