Brother DCP-8250DN

Using Address Book
31
4
i Select the resolution from 100 dpi,
200 dpi, 300 dpi, 600 dpi or Auto.
 If you chose E-Mail Color PDF,
go to step k.
 If you chose E-Mail Color JPEG
or E-Mail Color XPS, go to
step l.
j Select the resolution from 100 dpi,
200 dpi, 300 dpi or Auto.
 If you chose E-Mail Gray PDF, go
to step k.
 If you chose E-Mail Gray JPEG or
E-Mail Gray XPS, go to step l.
k Select the PDF type from PDF, PDF/A,
Secure PDF or Signed PDF that will
be used to send to your PC.
Note
If you choose Secure PDF, the machine
will ask you to enter a four-digit password
using numbers 0-9 before it starts
scanning.
l Enter a three-digit Speed Dial location
number (001-300).
Press OK.
m When the LCD displays your settings,
press OK to confirm.
n Press Stop/Exit.
Changing or Deleting Speed
Dial numbers 4
You can change or delete a Speed Dial
number that has already been stored.
a Press (Address Book).
b Press Edit.
c Do one of the following:
 Press Change to edit the name,
number or E-mail address and go to
step d.
 Press Delete to delete all
information in a Speed Dial.
Select the number you want to delete
by pressing it to display a red check
mark.
Press OK.
When Erase This Data?
appears, press Yes to accept it.
Go to step h.
d Press a or b to display the number you
want to change.
Press the number you want to change.
Note
Speed Dial numbers begin with #.
e Press Name:
Number/Address:
Resolution: or
PDF Type: