21
3
3
How to load
documents
3
You can make copies and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the ADF
(DCP-J715W only) 3
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Document Sizes Supported 3
How to load documents 3
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric. Instead use the scanner glass.
Make sure documents written with ink are
completely dry.
a Unfold the ADF Document Output
Support Flap (1).
b Fan the pages well.
c Adjust the paper guides (2) to fit the
width of your document.
d Make sure you place your documents,
face down, top edge first in the ADF
underneath the guides until you feel
them touch the feed roller and the LCD
shows ADF Ready.
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to copy or
scan pages of a book or one page at a time.
Document Sizes Supported 3
Loading documents 3
Paper: 80 gsm A4
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight: 64to90gsm
Length: Up to 297 mm
Width: Up to 215.9 mm
Weight: Up to 2 kg
To Next Page
Loading...
