Brother DCP-J515W - Making Copies; Copying Process and Settings

23
4
4
How to copy 4
The following steps show the basic copy
operation. For details about each option, see
the Advanced User’s Guide.
a Do one of the following to load your
document:
 Place the document face down in the
ADF. (DCP-J715W only)
(See Using the ADF (DCP-J715W
only) on page 21.)
 Load your document face down on
the scanner glass.
(See Using the scanner glass
on page 21.)
b Press + or - repeatedly until the number
of copies you want appears (up to 99).
1 No. of Copies
c Press Mono Start or Colour Start.
Note
If you want to sort copies, use the ADF.
(DCP-J715W only)
Stop copying 4
To stop copying, press Stop/Exit.
Copy settings 4
You can change the following copy settings.
Press a or b to scroll through the copy
settings. When the setting you want is
highlighted, press OK.
(Basic User’s Guide)
For details about changing the following copy
settings, see page 24.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For details about changing the following copy
settings, see chapter 3:
 Quality
 Enlarge/Reduce
 Density
 Ink Save Mode
 Stack/Sort (DCP-J715W only)
 Page Layout
 Book Copy
 Watermark Copy
 Set New Default
 Factory Reset
Making copies 4
1
0101
COPY
COPY
Quality Normal
Ratio:
Copy Press Start
Enlarge/Reduce 100%