EasyManuals Logo

Brother DCP-L5652DN User Manual

Brother DCP-L5652DN
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #353 background imageLoading...
Page #353 background image
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/
n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using
an Existing SSID
Related Models: MFC-L5700DW/MFC-L5705DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/
MFC-L6700DW/MFC-L6800DW
If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured
SSID, use these instructions.
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an
SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see
the instructions included with your computer or contact your network administrator.
Network Name (SSID)
Communication Mode Encryption Mode Network Key
Ad-Hoc NONE -
WEP
For example:
Network Name (SSID)
HELLO
Communication Mode Encryption Mode Network Key
Ad-Hoc WEP 12345
Your Brother machine supports the use of the first WEP key only.
2. Press [ ] [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. If a list of SSIDs is displayed,
swipe up or down or press a or b to display the SSID to which you want to connect, and then press the SSID.
5. Press [OK].
6. Enter the WEP key, and then press [OK].
Your Brother machine supports the use of the first WEP key only.
7. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
346

Table of Contents

Other manuals for Brother DCP-L5652DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5652DN and is the answer not in the manual?

Brother DCP-L5652DN Specifications

General IconGeneral
Printer TypeLaser
FunctionsPrint, Copy, Scan
Automatic Duplex PrintingYes
ADF Capacity50 sheets
Memory256 MB
Processor800 MHz
Monthly Duty CycleUp to 50, 000 pages
Print Speed42 ppm
Print Resolution1200 x 1200 dpi
Paper Input Capacity250 sheets
Scanner ResolutionUp to 1200 x 1200 dpi
ConnectivityUSB, Ethernet
Mobile PrintingBrother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner YieldStandard: 3, 000 pages, High Yield: 8, 000 pages

Related product manuals