EasyManuals Logo

Brother DCP-L5652DN User Manual

Brother DCP-L5652DN
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #355 background imageLoading...
Page #355 background image
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
Configure Your Machine for a Wireless Network Using the Machine's
Control Panel Setup Wizard
Related Models: MFC-L5700DW/MFC-L5705DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/
MFC-L6700DW/MFC-L6800DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
a. Check the documentation provided with your wireless access point/router.
b. The initial SSID could be the manufacturer's name or the model name.
c. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Interner provider.
2. On your Brother machine's LCD, press [ ] [Settings] > [All Settings] > [Network] > [WLAN] >
[Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs.
If a list of SSIDs is displayed, swipe up or down or press a or b to display the SSID to which you want to
connect, and then press the SSID.
5. Press [OK].
6. Do one of the following:
If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
When you have entered all the characters, press [OK].
348

Table of Contents

Other manuals for Brother DCP-L5652DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5652DN and is the answer not in the manual?

Brother DCP-L5652DN Specifications

General IconGeneral
Printer TypeLaser
FunctionsPrint, Copy, Scan
Automatic Duplex PrintingYes
ADF Capacity50 sheets
Memory256 MB
Processor800 MHz
Monthly Duty CycleUp to 50, 000 pages
Print Speed42 ppm
Print Resolution1200 x 1200 dpi
Paper Input Capacity250 sheets
Scanner ResolutionUp to 1200 x 1200 dpi
ConnectivityUSB, Ethernet
Mobile PrintingBrother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner YieldStandard: 3, 000 pages, High Yield: 8, 000 pages

Related product manuals