Brother DCP-T700W - Auto Power off

General information
9
1
Auto Power Off 1
The Auto Power Off feature will turn off the
machine after it has been in Sleep Mode for
the number of hours you set. When this
feature is Off, the machine will remain in
Sleep Mode and not turn itself off.
The default setting is 1hour.
To turn on the machine after the Auto Power
Off feature has turned it off, press Power
On/Off.
NOTE
(DCP-T500W and DCP-T700W)
The machine will not power off
automatically when:
• the machine is connected to a wireless
network
• WLAN Enable is set to On.
a Press Menu.
b Press a or b to choose
0.Initial Setup.
Press OK.
c Press a or b to choose
5.Auto Power Off.
Press OK.
d Press a or b to choose 1hour, 2hours,
4hours, 8hours or Off.
Press OK.
e Press Stop/Exit.