Brother DCP-T700W - Loading Documents; How to Load Documents; Using the ADF

20
3
How to load
documents
3
You can make copies or scan from the ADF
1
(automatic document feeder) and from the
scanner glass.
1
DCP-T700W only
Using the ADF (DCP-T700W) 3
The ADF can hold up to 20 pages and feeds
each sheet individually. Use paper that is
within the sizes and weights shown in the
table. Always fan the edges of the pages
before placing them in the ADF.
Document Sizes and Weights 3
How to load documents 3
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, glued or taped.
• DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
Make sure documents written with ink or
modified with correction fluid are completely
dry.
a Unfold the ADF Document Support (1).
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your documents.
d Place your documents face down, top
edge first in the ADF underneath the
guides until you feel them touch the feed
rollers.
The screen will display ADF Ready.
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Loading documents 3
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Paper weight: 64 to 90 gsm
1
1