Brother DCP-T700W - Paper Settings; Paper Type; Paper Size

Chapter 2
16
Paper settings 2
Paper Type 2
To get the best print quality, set the machine
for the type of paper you are using.
a Press Menu.
b Press a or b to choose 2.Copy.
Press OK.
c Press a or b to choose 1.Paper Type.
Press OK.
d Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy.
Press OK.
e Press Stop/Exit.
NOTE
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When you use glossy
paper, remove each sheet at once to
prevent smudging or paper jams.
Paper Size 2
You can use the following sizes of paper for
copies: A4, A5, Photo (10  15 cm), Letter
and Legal
1
. When you change the size of
paper you load in the machine, you will need
to change the Paper Size setting at the
same time.
a Press Menu.
b Press a or b to choose 2.Copy.
Press OK.
c Press a or b to choose 2.Paper Size.
Press OK.
d Press a or b to choose A4, A5,
10x15cm, Letter or Legal
1
.
Press OK.
e Press Stop/Exit.
1
Only available for some countries.