Brother DCP-T700W - Page 76

68
3.Network
(Continued)
4.WPS/AOSS — — You can easily configure
your wireless network
settings using the one-
button push method.
See .
5.WPS w/PIN Code — — You can easily configure
your wireless network
settings using WPS with
a PIN code.
6.WLAN Status 1.Status — You can see the current
wireless network status.
2.Signal — You can see the current
wireless network signal
strength.
3.SSID — You can see the current
SSID.
4.Comm. Mode — You can see the current
Communication Mode.
7.MAC Address — — You can see your
machine’s MAC address
from the control panel.
8.WLAN Enable — On
Off*
Lets you use the wireless
network connection.
0. Network Reset — — Restores all network
settings to the factory
default.
Level1 Level2 Level3 Options Descriptions Page
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.