Brother HL-2030 - Top Cover; Paper Stopper

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Confidential
4-8
3.8 Top Cover / Paper Stopper
(1) Remove the bind B M4x12 taptite screw, and then remove the rear cover stopper.
Fig. 4-10
(2) Remove the two bind B M4x12 taptite screws and the rear chute cover spring.
(3) Remove the inner chute.
Fig. 4-11
NOTE:
Re-assemble the inner chute while pushing onto the pinch roller of the inner chute with the
eject roller of the top cover.
Fig. 4-12
Taptite, bind B M4x12
Taptite, bind B M4x12
Rear chute cover spring
Inner chute
Taptite, bind B M4x12
Pinch roller Inner chute
Rear cover stopper
Hooks
Main frame R
Hook
Top cover
Pinch roller
Eject roller