Brother HL-2030 - Optional Print Server

HL-2030/2040/2070N SERVICE MANUAL
Confidential
2-29
7. OPTIONAL PRINT SERVER
This printer has the following optional print servers.
Model NC-2200w NC-2100p
HL-2030 O N/A
HL-2040 O O
HL-2070N O N/A
Wireless print server (NC-2200w)
An optional network print server (NC-2200w) allows you to print in a wireless environment
through the USB interface. The NC-2200w is compatible with Windows
®
98/ME, Windows NT
®
4.0 and Windows
®
2000/XP.
The Brother NC-2200w wireless print server supports the IEEE 802.11b wireless networking
standard and can work in infrastructure or Ad-hoc mode using common wireless authentication
and security methods.
For more information, please visit our web site at http://solutions.brother.com
.
Network interface IEEE 802.11b wireless
Communication Mode Infrastructure / Ad-hoc 802.11
Security SSID, WEP (64/128bit)
Printer Interface USB 2.0 (Full-speed)
Support Protocol TCP/IP
Embedded web server support
SNMP/MIB support
TELNET remote console
BRAdmin Professional compatible
Management Features
Flash memory for easy updating of firmware
Print server (NC-2100p) (For HL-2040)
An optional network print server (NC-2100p) allows you to connect to your network through the
parallel interface.
Network interface 10/100BASE-TX Ethernet
Printer Interface Parallel
Support Protocol TCP/IP, NetBEUI
Embedded web server support
SNMP/MIB support
TELNET remote console
BRAdmin Professional compatible
Management Features
Flash memory for easy updating of firmware
Note:
HL-2070N already has a built-in 10/100BASE-TX Ethernet Print Server.