CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Confidential
4-34
3.23 Fan Motor 60 Unit
(1) Remove the three bind B M4x12, taptite screws and three FG harness ASSY 1, 4, 5.
(2) Remove the base plate.
Fig. 4-57
(3) Release the harness from the hook, and then remove the fan motor 60 unit from the main
frame R.
Fig. 4-58
Fan motor 60 unit harness
Taptite, bind B M4x12
FG harness ASSY 1
FG harness ASSY 4
Base plate
Hooks
Hooks
Chute
Fan motor 60 unit
Main frame R
Printer top side
(Printer body
upside down)
FG harness ASSY 5
To Next Page
Loading...
