Brother HL-T4000DW - Page 337

Level 1 Level 2 Level 3 Descriptions
Quiet Mode
- - Decrease printing noise.
Tray Setting Tray #1 Paper Type
Set the type of paper in paper tray #1.
Paper Size
Set the size of paper in paper tray #1.
MP Tray Paper Type
Set the type of paper in the MP tray.
Paper Size
Set the size of paper in the MP tray.
Beep
- - Adjust the beeper volume.
All Settings
- - Configure the detailed settings.
[General Setup]
[Settings] > [All Settings] > [General Setup]
Level 1
Level 2 Level 3 Descriptions
Maintenance Improve Print
Quality
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Print Head
Cleaning
- Clean the print head according to the LCD
instructions.
Remove Paper
Scraps
- Remove a piece of paper in the machine according to
the LCD instructions.
Ink Low Notice
- Set the machine to display the ink low messages.
Ink Bottle
Model
- Check the ink bottle numbers.
Print Setting
Options
Reduce
Smudging
Reduce smudging on the paper or paper jams during
printing.
Reduce
Uneven Lines
Reduce uneven lines on the paper during printing.
Slow Drying
Paper
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Tray Setting Tray #1 Paper Type
Set the type of paper in paper tray #1.
Paper Size
Set the size of paper in paper tray #1.
MP Tray Paper Type
Set the type of paper in the MP tray.
Paper Size
Set the size of paper in the MP tray.
Tray Setting:
Print
Tray
Priority
Change the tray priority for printing from your
computer.
Tray Setting:
JPEG Print
(Media)
Tray Use
Select the tray to be used for printing photos from a
USB flash drive.
Tray
Priority
Change the tray priority for printing photos from a
USB flash drive.
Check Paper
- Check the paper type and paper size when you pull
the tray out of the machine.
Quiet Mode
- - Decrease printing noise.
Beep
- - Adjust the beeper volume.
LCD Settings Backlight
- Adjust the brightness of the LCD backlight.
Dim Timer
- Set how long the LCD backlight stays on after the last
finger press.
Keyboard
Settings
- - Select the type of keyboard for the LCD.
332