Brother HL-T4000DW - Page 336

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (2.7" Touchscreen models)
Settings Tables (2.7" Touchscreen models)
These tables will help you understand your machine's menu selections and options.
>> [Settings]
>> [General Setup]
>> [Network]
>> [Print Reports]
>> [Machine Info.]
>> [Initial Setup]
[Settings]
[Settings]
Level 1
Level 2 Level 3 Descriptions
(Date & Time)
Date
- Set the date and time on your machine.
Time
-
Clock Type
(Available only for some
countries.)
- Select the time format (12-hour or 24-hour).
Auto Daylight
(Available only for some
countries.)
- Set the machine to change automatically for Daylight
Saving Time.
Time Zone
- Set your time zone.
Maintenance Improve Print
Quality
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Print Head
Cleaning
- Clean the print head according to the LCD
instructions.
Remove Paper
Scraps
- Remove a piece of paper in the machine according to
the LCD instructions.
Ink Low Notice
- Set the machine to display the ink low messages.
Ink Bottle Model
- Check the ink bottle numbers.
Print Setting
Options
Reduce
Smudging
Reduce smudging on the paper or paper jams during
printing.
Reduce Uneven
Lines
Reduce uneven lines on the paper during printing.
Slow Drying
Paper
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Wi-Fi TCP/IP
- Set TCP/IP protocol.
Setup Wizard
- Configure your wireless network settings manually.
WLAN Assistant
- Configure your wireless network settings using the
Brother installation disc.
WPS
- Configure your wireless network settings using the
one-button push method.
WPS w/ PIN Code
- Configure your wireless network settings using WPS
with a PIN.
WLAN Status
- View the current wireless network status.
MAC Address
- View the machine's MAC address.
331