Brother MFC-210C User Manual

TROUBLESHOOTING AND ROUTINE MAINTENANCE 11 - 3
Out of Memory The MFC’s memory is full. (Fax sending or copy operation in process)
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
—OR—
(MFC-410CN only) Clear the data in the
memory. To gain extra memory, you can turn
off Fax Storage. (See Setting Fax Storage on
page 6-2.)
—OR—
(MFC-410CN only) Print the faxes that are in
the memory.
(See Printing a fax from the memory
(MFC-410CN only)
on page 4-5.)
(Printing operation in process)
Reduce print resolution.
Paper Jam The paper is jammed in the MFC. (See Printer jam or paper jam on page 11-5.)
Wrong Paper
Size
Paper is not the correct size. Reload the correct size of paper (Letter, Legal
or A4), and then press Mono Start or
Colour Start.
ERROR MESSAGES
ERROR
MESSAGE
CAUSE ACTION

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office