Receiving a fax
27
4
c Press a or b to choose Standard,
Secure or Timer.
Press OK.
d Choose one of the options below.
If you choose Standard go to step
e.
If you choose Secure, enter a four-
digit number, press OK, go to step
e.
If you chose Timer, enter the time
(in 24-hours format) you want to
begin polling and press OK, go to
step e.
If you did not enter the correct Secure
Code, you will receive the message
Disconnected.
e Specify the destination fax machines
you want to poll by using One Touch,
Speed Dial, Search, a Group or the dial
pad. You must press OK between each
location.
f Press Start.
Stop polling 4
To cancel the polling process, press
Stop/Exit while the machine is dialling, and
then press 1.
To cancel all sequential polling receive jobs,
press Menu, 2, 7. (See Checking and
cancelling waiting jobs uu page 15.)
To Next Page
Loading...
