Brother MFC-7290 - Dialling and Storing Numbers; How to Dial

Making copies
39
7
Note
Page Layout Options 2in1(P), 2in1(L),
4in1(P) and 4in1(L) are not available
with Enlarge/Reduce.
Making N in 1 copies
(page layout) 7
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page.
Important
• Please make sure the paper size is set to
A4, Letter, Legal
1
or Folio
1
.
1
For Asia
• (P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a Make sure you are in COPY mode
.
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
f Press Start to scan the page.
Insert your document face down in the
direction shown below:
 2in1(P)
 2in1(L)
 4in1(P)
 4in1(L)
Manual Duplex (two-sided)
Copying 7
If you want to copy two sided documents
manually, use the manual feed slot.
a Make sure you are in COPY mode
.
b Place the first page of the document in
the ADF. (See Basic User’s Guide: How
to load documents.)
c Load a sheet of paper into the manual
feed slot. (See Basic User’s Guide:
Loading paper in the manual feed slot.)
d Press Start to copy the first page.
e After the machine scans the first page,
place the second document in the ADF.
f Turn over the printed paper and load it
into the manual feed slot again to copy
onto the other side.