Brother MFC-7440N

Control panel setup
22
3
e (For MFC-7440N)
Press 1 to choose Change.
f Enter the Node Name.
Press OK.
Note
For DCP-7045N:
You cannot change the Node Name from the control panel menu. See Changing the print server
settings on page 15 for how to change the Node Name.
g Press Stop/Exit.
WINS Config 3
This selection controls how the machine obtains the IP address of the WINS server.
a Press Menu.
b Press a or b to choose LAN.
Press OK.
c Press a or b to choose TCP/IP.
Press OK.
d Press a or b to choose WINS Config.
Press OK.
e Press a or b to choose Auto or Static.
Press OK.
f Press Stop/Exit.
Auto
3
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
3
Uses a specified IP address for the primary and secondary WINS servers.