Brother MFC-790CW - Setting up Your Machine; Enable Bluetooth Wireless Technology on Your Machine; Pass Key

Wireless photo printing (MFC-990CW only)
125
15
Setting up your
machine
15
Enable Bluetooth
®
wireless
technology on your machine 15
You can set Bluetooth
®
wireless technology
to On or Off.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Turn On/Off.
e Press Turn On/Off.
f Press On (or Off).
g Do one of the following:
 If you want to change other settings,
press the setting you want to change.
 If you do not want to change other
settings, press Stop/Exit.
Pass key 15
This setting creates a password that
authorizes a Bluetooth
®
wireless technology
enabled device to communicate with your
machine. The default setting is 0000.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Settings.
e Press Settings.
f Press a or b to display Pass Key.
g Press Pass Key.
h Enter a 4-digit number password using
the buttons on the LCD.
Press OK.
i Press Stop/Exit.
Settings
Settin gs
0000Pass Key
PublicComm. Mode
xx:xx:xx:xx:xx:xxDevice Address