EasyManuals Logo

Brother MFC-790CW User Manual

Brother MFC-790CW
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Chapter 7
70
Connections 7
The external TAD must be plugged into the
jack labeled EXT. Your machine cannot work
properly if you plug the TAD into a wall jack
(unless you are using Distinctive Ring).
a Plug the telephone line cord from the
telephone wall jack into the jack labeled
LINE.
b Remove the protective cap (1) from the
jack labeled EXT, and then plug the
telephone line cord from the external
TAD into the EXT. jack. (Make sure this
cord is connected to the TAD at the
TAD's telephone line jack, and not its
handset jack.)
c Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
d Record the outgoing message on your
external TAD.
e Set the TAD to answer calls.
f Set the Receive Mode to Manual with
Easy Receive turned on. (See Choose
the correct Receive Mode on page 45.)
Recording outgoing message
(OGM) on an external TAD 7
Timing is important in recording this
message. The message sets up the ways to
handle both manual and automatic fax
reception.
a Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b Limit your speaking to 20 seconds.
c End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
‘After the beep, leave a message or
send a fax by pressing l 51 and Start.’
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
1

Table of Contents

Other manuals for Brother MFC-790CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-790CW and is the answer not in the manual?

Brother MFC-790CW Specifications

General IconGeneral
Print technologyInkjet
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Grayscale levels256
Maximum scan resolution19200 x 19200 DPI
PC free copyingYes
Maximum copy resolution1200 x 1200 DPI
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed33.6 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF) input capacity15 sheets
DisplayLCD
Display diagonal4.2 \
Market positioningHome & office
Compatible memory cardsCF, MS Pro, SD, SDHC, xD
Envelopes sizesC5, DL
Paper tray media typesGlossy paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
JIS B-series sizes (B0...B9)B5
Ethernet LANNo
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Dimensions (WxDxH)460 x 375 x 180 mm
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionsfax, print, scan

Related product manuals