Brother MFC-8380DN - 3 General Setup; Mode Timer; Paper Settings; Paper Type

21
3
3
Mode Timer 3
The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode default. If you choose
Off, the machine will stay in the mode you
used last.
This setting also sets the time the machine
will change from individual user to the Public
user when using Secure Function Lock. (See
Switching Users on page 30.)
(MFC-8380DN)
a Press Menu, 1, 1.
b Press a or b to choose 0 Sec, 30 Secs,
1 Min, 2 Mins, 5 Mins or Off.
Press OK.
c Press Stop/Exit.
Paper settings 3
Paper Type 3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a Do one of the following:
 To set the paper type for the
MP Tray press Menu, 1, 2, 1, 1.
 To set the paper type for Tray#1
press Menu, 1, 2, 1, 2.
 To set the paper type for Tray#2
1
press Menu, 1, 2, 1, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed. The optional tray
is available for MFC-8380DN.
b Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
c Press Stop/Exit.
Note
You can choose Transparency for
Tray#1 and the MP Tray.
General Setup 3