Brother MFC-8380DN - Setting up the Password; Changing the Memory Security Password; Turning Memory Security On;Off

Security features
31
4
Setting up the password 4
Note
• If you have already set the password, you
will not need to set it, again.
• If you forget the Memory Security
password, please call your Brother dealer.
a Press Menu, 1, 8, 1.
b Enter a four-digit number for the
password using number 0-9.
Press OK.
c If the LCD shows Verify:, re-enter the
new password.
Press OK.
d Press Stop/Exit.
Changing the Memory
Security password 4
a Press Menu, 1, 8, 1.
b Press a or b to choose Set Password
Press OK.
c Enter your four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e If the LCD shows Verify:, re-enter the
new password.
Press OK.
f Press Stop/Exit.
Turning Memory Security
on/off 4
If you enter the wrong password, when
following the instruction below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Memory Security on
a Press Menu, 1, 8, 1.
b Press a or b to choose Set Security.
Press OK.
c Enter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Note
If there is a power failure the data will stay
in memory for up to 4 days.
Turning Memory Security off
a Press Menu.
Enter the registered four-digit password.
Press OK.
b Memory Security is automatically turned
off and the LCD shows the date and
time.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
Mode until the registered password is
entered.