Wireless configuration for Windows
®
using the Brother installer application (For MFC-8890DW)
63
4
m The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the
Name(SSID) and the Channel number, and then click Next.
n If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to step p.
To Next Page
Loading...
Need help?
General
