Brother MFC-9320CW - Page 342

5-127
Confidential
Fig. 5-148
<LED ASSY side>
There are lines on the side of LED ASSY of the FFC sheet. Make to fold FFC sheet along
the line in order to replace LED ASSY correctly.
Fig. 5-149
Assembling Note:
- The LED parts of the LED ASSY for replacement are covered with protection tapes.
Make sure not to remove the protection tapes until assembling of the LED ASSY is
completed. After it is assembled, make sure to remove the protection tapes.
- If the LED parts get smeared, make sure to wipe smears on the LED parts with a clean
and soft cloth.
Assembling Note:
Since folding part of FFC sheet is different according to color of LED, make sure to fold FFC
sheet as shown in Fig. 5-149 and Fig. 5-150 before assembling LED ASSY.
LED ASSY
LED parts
FFC sheet
First (K), Forth (C)
Second (Y), Third (M)
Fold up FFC along with the dotted line
LED ASSY