Brother MFC-9460CDN - General Setup; Memory Storage; Volume Settings; Ring Volume

1
1
1
Memory storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast, Overseas Mode) will be lost. Also,
during a power failure the machine will retain
the date and time and programed fax timer
jobs (fx. Delayed Fax) for approximately 60
hours. Other fax jobs in the machine memory
will not be lost.
Volume settings 1
Ring volume 1
You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press or to adjust
the volume level. The LCD will show the
current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the ring volume through
the menu:
a Press Menu, 1, 3, 1.
13.Volume
1.Ring
a Med
b High
Select ab or OK
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.
General Setup 1