Brother MFC-9460CDN - Turning Setting Lock On;Off; Restricting Dialing; Dial Pad Restriction

Security features
13
2
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a Press Menu, 1, 7, 2.
17.Security
2.Setting Lock
a On
b Set Password
Select ab or OK
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning Setting Lock off
a Press Menu, 1, 7, 2.
17.Security
2.Setting Lock
Password:XXXX
Enter & OK Key
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.
Restricting dialing 2
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialing by
using the dial pad, One Touch and Speed
Dial.
If you choose Off, the machine does not
restrict any dialing method.
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialing. If you
re-enter the wrong number, the LCD will
show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialing method.
Dial pad restriction 2
a Press Menu, 2, 6, 1.
26.Dial Restrict.
1.Dial Pad
a Off
b Enter # twice
Select ab or OK
b Press a or b to choose Off,
Enter # twice or On.
Press OK.
c Press Stop/Exit.