Brother MFC-9460CDN - Deleting Group Numbers

Dialing and storing numbers
41
5
 To delete One Touch or Speed Dial
numbers, press d or c to position the
cursor under the number you want to
delete, and then press Clear.
Press OK.
e Edit the name by the following
instruction.
 When you edit the existing name,
press d or c to position the cursor
under the character you want to
change. Then enter characters or
press Clear to delete it.
When you have finished editing,
press OK.
f If you want to change the existing fax
resolution along with the number, press
a or b to choose the resolution you
want.
Press OK.
g Press Stop/Exit.
Deleting Group numbers 5
You can delete a Group number that has
already been stored. The LCD will show the
name or number, and if the Group has a fax
forwarding number, it will display a message.
a Press Menu, 2, 3, 3.
23.Address Book
3.Setup Groups
Group Dial:
Press Speed Dial or On
b Choose the One Touch key or Speed
Dial number where the group is stored.
Do one of the following:
 Press the One Touch key. Press OK.
 Press a Speed Dial and enter the
three-digit Speed Dial number. Press
OK.
c To clear the stored data, press 2.
23.Address Book
G01:*001*002#001
a 1.Change
b 2.Clear
Select ab or OK
d Do one of the following:
 To clear the stored data, press 1.
 To exit without deleting the group,
press 2.
23.Address Book
Erase This Data?
a 1.Yes
b 2.No
Select ab or OK
e Press Stop/Exit.