Routine maintenance
79
e Hold the green handle of the belt unit
with both hands and lift the belt unit up,
then pull it out.
f Remove two pieces of orange packing
material and discard them.
This step is only necessary when you are
replacing the waste toner box for the first
time, and is not required for the
replacement waste toner box. The orange
packing pieces are installed at the factory
to protect your machine during shipment.
g Remove the waste toner box from the
machine using the green handle, and
then put it in a plastic bag and seal the
bag completely.
Handle the waste toner box carefully. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
To Next Page
Loading...
