Sending a fax
17
You can choose four different resolution
settings for black & white faxes and two for
color.
Black & white:
Standard: Suitable for most typed
documents.
Fine: Good for small print and transmits a
little slower than Standard resolution.
S.Fine: Good for small print or artwork
and transmits slower than Fine
resolution.
Photo: Use when the document has
varying shades of gray or is a photograph.
This has the slowest transmission time.
Color:
Standard: Suitable for most typed
documents.
Fine: Use when the document is a
photograph. The transmission time is
slower than Standard resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a Make sure you are in Fax mode .
b Load your document.
c Press Hook and listen for a dial tone.
Or pick up the handset of the external
telephone and listen for a dial tone.
d Dial the fax number you want to call.
e When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
f Replace the handset of an external
telephone.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
